ResMed AirFit P10 for AirMini Mask Pack
ResMed controls how its prices are advertised, so we show them once you sign in. Signing in takes an emailed code, with no password to set up.
Sign in to see the priceIn stock
- Free shipping over $75
- 30-night fit guarantee Try your mask for up to 30 nights. If it doesn't fit, send it back for store credit toward another size or style. Unopened masks can be returned for a refund or store credit.
- Price match guarantee
Overview
This pack is a complete nasal pillows setup for the ResMed AirMini: the AirFit P10 for AirMini mask, its tube, spare pillows and both waterless humidifier inserts. Add the machine and you have everything you need for therapy, with nothing else to source or adapt.
ResMed made this version for the AirMini alone, pairing the familiar AirFit P10 design with the HumidX inserts that sit in its vent module. If you already use a standard AirFit P10 at home, the pillows and headgear on this one should feel familiar.
Key features:
- Dual-wall pillows: ResMed designs these pillows to seal on contact and direct air gently into each nostril.
- Humidity without water: HumidX and HumidX Plus recycle warmth and moisture from your own breath, so there's no tank to fill or empty.
- Split headgear: One band rests over your crown and one at the back of your head, and spreading or drawing them together adjusts the fit.
- Quiet mask: ResMed publishes a low sound rating for this mask, and the figures are listed in Specifications.
- Latex-free: ResMed confirms no natural rubber latex goes into this mask, helpful if latex tends to irritate your skin.
If this is your first AirMini, or you'd like a mask that stays packed in your travel bag, this pack is built to suit the machine. Add it alongside the AirMini in your order, and you're ready for the first night away from home.
Note: The AirMini is sold separately, and this mask connects to no other machine. ResMed rules out supplemental oxygen with it, so call us before ordering if you use oxygen at night.
How it works
Putting it together
The short mask tube joins the vent module, which holds the HumidX, and the vent module joins the AirMini tube. Drop the HumidX in with its coloured side down, then push each joint together and twist until it locks.
Fitting the mask
Set up the AirMini first. Line up the pillow marked L with your left nostril and R with your right, then pull the headgear over your head so the lower band rests at the back and the upper band sits on your crown.
Lift the mask away from your nose for a moment and let the pillows settle back, both standing upright. With the air running, hold a finger near the vent at the tube joint and feel for a light breeze, which tells you the vent is clear.
Weekly care
Once a week, scrub the frame and the end of the mask tube with a soft brush, and hand wash the headgear in warm, soapy water. Wash the AirMini tube weekly too, and keep the vent module and both tubes out of the dishwasher.
Additional information
The AirMini Mask Setup Pack with AirFit P10 Mask is a tubing kit connected to a specially adapted version of the AirFit P10 Nasal Pillows CPAP Mask. This setup pack includes a complete P10 mask exclusively compatible with ResMed's ultra-portable AirMini Auto-CPAP Machine.
This setup pack includes a long breathing tube with the specially adapted AirFit P10 Nasal Pillows Mask for use with AirMini Portable CPAP Machines. The mask includes headgear and 3 pillow sizes (Small, Medium & Large).
Two HumidX humidifiers (1 Standard & 1 Plus) are also included with this setup pack. One HumidX at a time sits inside the mask's vent module, between the mask and the AirMini tube, to add humidification without a water based humidifier.
USAGE: This mask pack includes a specially adapted AirFit P10 Nasal Pillows Mask. If you already have a standard AirFit P10 Mask, it WILL NOT work with the AirMini Auto-CPAP Machine.
What's included
- AirFit P10 for AirMini mask, with medium pillows attached
- Small and large pillows
- AirMini tube
- One HumidX and one HumidX Plus
Specifications
- Part number
- 38824
- Mask type
- Nasal pillows, seals at the nostrils
- Machine
- ResMed AirMini only
- Pillow sizes
- Small, medium (fitted) and large
- Humidification
- Waterless: HumidX (blue) or HumidX Plus (grey)
- Tube
- AirMini tube, 1.9 m (6 ft 2 in), 15 mm inner diameter
- Mask sound (ISO 4871)
- 15 dBA sound pressure at 1 m, 22 dBA sound power (P10 for AirMini)
- Dead space
- 40 mL (large pillows)
- Frame size, large (H x W x D)
- 175 x 149 x 37 mm, without headgear
- Tube life
- Replace at least every 6 months (ResMed)
- HumidX life
- Replace within 30 days of opening
- Supplemental oxygen
- Not compatible
- Latex
- Not made with natural rubber latex
- Health Canada licence
- 99052 (Class II)
Features and use
Clear view in bed
ResMed built this frame for reading or watching TV before bed, with the seal at your nostrils and nothing crossing your field of view. The split headgear steadies the pillows with one band over your crown and one at the back of your head.
Getting a good pillow seal
A leak, a noisy mask or red marks usually mean the pillows need reseating rather than tightening. Check the L and R pillows sit at the right nostrils, lift the mask away briefly and let them settle back upright.
- Squeeze a squashed pillow back into shape
- If the seal still won't hold, try another size from the box
Quiet in a shared bedroom
ResMed rates the mask on its own at 15 dBA of sound pressure from a metre away. Your exhaled air leaves through the vent module at the tube joint, a short way from your face.
- Keep the vent holes clear of bedding
- Replace a cracked or torn part rather than living with the noise
Machine fit and spare parts
This mask connects to the ResMed AirMini and no other machine. Its pillows and headgear, though, carry the same ResMed part numbers as the standard AirFit P10, so familiar spares fit.
- For a bedside machine, the standard AirFit P10 is the mask to choose
- ResMed makes extra small pillows, sold separately
Nasal pillows
ResMed designs its dual-wall pillows to seal on contact and send air gently into the nose. Each one keys onto the frame for its own nostril, so they only go on the right way.
Complete kit
The mask, its tube and two humidifier inserts arrive in one box, ready for the AirMini with no adapter. If you're new to the AirMini, this is the whole setup between the machine and you.
Waterless humidity
A HumidX insert rides inside the vent module and returns warmth and moisture from your own breath. Nothing needs filling, so there's no distilled water to find in a strange town.
Three sizes
The medium pillows come fitted, with the small and large in the box. Trying all three at home should settle your size, with no guessing before you order.
Setup and use videos
Common questions
How often should I replace the parts in this pack?
ResMed's AirMini guide asks for a fresh HumidX within 30 days of opening its pack, and a new AirMini tube at least every six months. For the pillows, frame and headgear, ResMed's mask guide sets no fixed schedule and says to replace any part that cracks, tears or discolours.
Will the AirFit P10 I already own work with the AirMini?
No. On ResMed's compatibility list the standard AirFit P10 carries a cross on the AirMini row, and ResMed points to the AirMini's venting as the reason. The P10 for AirMini is the version ResMed made to suit that venting.
Does this pack come with the AirMini machine?
No. It holds the mask, the tube and the humidifier inserts, and the machine is sold separately. The AirMini needs a pack like this one to run, so if you're starting from scratch, our AirMini bundle pairs the two in one order.
Which pillow size should I try first?
Begin with the medium pillows that come fitted to the mask. ResMed publishes no sizing chart for this mask, so if it leaks or feels tight, try the small or large from the box. Each pillow is marked L or R for the nostril it fits.
Should I choose the P10 or the N30 for AirMini?
Choose the P10 if you like a seal right at the nostrils with a light split strap. The AirFit N30 for AirMini uses a cradle cushion that rests under your nose instead, an option if pillows at the nostrils bother you. Both packs include the tube and HumidX inserts.
How do I clean the mask each day?
Lift the HumidX out first, then hand wash the pillows, frame, mask tube and vent module in warm water with a little gentle detergent. Brush the vent holes with a soft brush, rinse and air dry away from direct sun. Hand wash the headgear once a week.
Need help?
Not sure it works with your equipment, or how it fits your nightly routine? Call or chat with our team before you order.