RESMED | SKU 64213

ResMed AirFit N30 Cradle Cushion

Price after sign-in

ResMed controls how its prices are advertised, so we show them once you sign in. Signing in takes an emailed code, with no password to set up.

Sign in to see the price

In stock

Cushion Size
  • Free shipping over $75
  • Price match guarantee
Fits
  • AirFit N30 nasal cradle mask
Replace every Every month (ResMed)
Overview

This is the silicone cradle cushion for the ResMed AirFit N30, the part that rests under your nose and seals there rather than inside your nostrils. A new one helps the mask feel soft again and seal at an easy strap setting.

It fits the AirFit N30 nasal cradle mask in three sizes: Small (64213), Medium (64214) and Small Wide (64215). Each order is one cushion, and your frame and headgear carry over unchanged.

Key features:

  • Lightweight silicone: Soft, light silicone conforms to your nose, so the cushion adds little weight to an already small mask.
  • One size at a time: Once the starter pack's Small, Medium and Small Wide cushions have shown your fit, this is where you reorder just that size.
  • Notch and tab: A notch in the cushion meets a tab on the frame, lining the two up the same way every time you fit it.
  • No magnets: The N30 headgear fastens with a buckle rather than magnets, and the mask is not on ResMed's magnet safety notice.
  • Same machine setting: Your AirSense or AirCurve stays on the Pillows mask setting, exactly as it was with the cushion you're replacing.

It suits N30 wearers who like the mask and want it to feel new again, and anyone who has settled on one size from the starter pack. If you'd rather have pillows that sit inside the nostrils, the AirFit P10 is the ResMed alternative.

Note: This cushion is for the standard AirFit N30 with the front tube. The AirFit N30i and AirTouch N30i use different cushions, and the standard N30 is not compatible with the AirMini.

📄 ResMed AirFit N30 fitting template (PDF)

How it works

Taking the old one off

Hold the frame and firmly pinch one side of the cushion, then pull it away. The headgear stays attached to the frame throughout.

Fitting the new one

Line up the notch in the cushion with the tab on the frame. Press one side on, then the other, and push around the edges until they lie completely flat. Hold it with the size and the L and R facing you as you bring it up under your nose.

Daily and weekly care

After each night, soak the cushion briefly in warm water with mild detergent and go over it with a soft brush. Rinse it well and lay it on a towel to dry, out of strong sunlight. Do the frame and headgear this way once a week.

What's included
  • One AirFit N30 cradle cushion in the size you choose
Specifications
Sizes and part numbers
64213 (Small), 64214 (Medium), 64215 (Small Wide)
Colour code
Small red, Medium blue, Small Wide purple
Material
Silicone
Markings
Size, plus L and R, on the cushion
Mask setting
Pillows, on ResMed AirSense and AirCurve machines
Magnets
None
Not for
AirFit N30i, AirTouch N30i, AirFit P30i, AirMini
Pack
One cushion
ResMed AirFit N30 Cradle CushionPrice after sign-in

Everything you need to know about the ResMed AirFit N30 Cradle Cushion

Keeps the seal soft

Fresh silicone flexes to the shape under your nose, so the N30 can seal with light strap tension instead of a firm pull. You replace only the cushion, and the frame and headgear you've already adjusted stay as they are.

Prevents red marks and leaks

ResMed says a used cushion can turn yellow, rough or stiff, and a stiff one may need tighter headgear to stop leaks, which can leave marks on your face. Changing it before then helps you avoid both.

Cradle under the nose

The cushion curves beneath your nose instead of sitting in your nostrils or across the bridge, a shape ResMed designed to help prevent soreness in both places. The design also keeps the mask compact, which ResMed had in mind for side sleepers and glasses wearers.

Front view of the ResMed AirFit N30 cradle cushion in Medium, blue base, with L and R markings

Soft silicone

Lightweight silicone conforms to the shape of your nose, so a new cushion settles gently against your skin.

Colour-coded sizes

Red marks Small, blue marks Medium and purple marks Small Wide, which makes your reorder simple to match.

Orientation marks

The size and an L and R are printed on the cushion, showing which way round it goes before you put it on.

Pinch to remove

Pinch one side and the cushion comes off the frame, leaving the headgear you already adjusted where it is.

Frequently Asked Questions

Will this cushion fit my AirFit N30i?

No. The AirFit N30i, AirTouch N30i and AirFit P30i take their own cushions, under different ResMed part numbers. This one is made for the AirFit N30, the mask whose tube leaves from the front.

Which size should I order for my N30?

Match the colour you wear now. New to the N30? ResMed's printable fitting template points narrower noses to Small or Medium and wider ones to Small Wide, and if you fall between two sizes it suggests the larger.

How do I clean the N30 cushion?

ResMed's guide calls for cleaning it after every use. Give it a few minutes in a bowl of warm, mildly soapy water, brush it gently, rinse it under the tap and air dry it out of the sun. ResMed rules out machine washing of any kind.

How often does ResMed suggest replacing it?

Once a month, on ResMed's replacement schedule. Change it earlier if the silicone cracks, crazes or tears, because ResMed's guide treats any visible deterioration as a reason to throw it out.

Does the N30 cushion work with the AirMini?

Not with the standard N30, which ResMed lists as incompatible with the AirMini. The AirMini takes its own N30 version with custom connecting ports, and ResMed doesn't say whether this cushion fits that one.