
DreamWear Headgear with Arms
In stock
- Free shipping over $75
- Price match guarantee
Overview
The slip resistant DreamWear headgear with Arms was designed with your quality of sleep in mind. The headgear arms, which are designed similar to how eyeglass arms would work, help to reduce mask and headgear movement while sleeping. Because the headgear and mask move less during sleep, the amount of mask leaks are reduced as well allowing for a better nights sleep.
USAGE: This headgear is compatible with DreamWear Nasal and DreamWear Nasal Pillow Masks. It is NOT compatible with the DreamWear Full Face mask.
What's included
- DreamWear headgear with arms (Philips 1116751)
Specifications
- Part number
- Philips 1116751
- Type
- Headgear with soft R and L arms
- Made for
- DreamWear Nasal (under the nose) and DreamWear Silicone Pillows
- Frame sizes
- Small, medium and large
- Not for
- DreamWear Full Face, which uses its own headgear
- Attaches by
- Arms through the frame loops, tabs folded back
- Magnets
- None listed by Philips
- Not included
- Frame, cushions and fabric wraps
- Washing
- By hand weekly with mild soap, dry flat or on a line, no dryer or dishwasher
- Replacement
- Mask and headgear yearly (Philips pillows guide), sooner if worn
- Stability survey
- 88% of 140 original-headgear users rated it more stable (Philips, 30 days, 2019)
- Manufacturer warranty
- 90 days (Philips)
Features and fit
What Philips found in testing
In a 30-day Philips survey of 140 DreamWear Nasal users who had worn the original headgear, 88 percent said the version with arms felt more stable.
- It was a self-reported preference survey run by Philips
- The figure is about stability, not a measured drop in leaks
Fitting the arms to your frame
Push the arm marked R through the right loop on the frame and the arm marked L through the left. Then slide the fabric tabs into the slots on each arm and fold them back.
- The letters face outward once it's on
- To remove it, gently pull each arm back out of its loop
Keeping the headgear fresh
Philips recommends washing the headgear with arms by hand each week, using warm water and a gentle soap. Rinse well, then lay it flat or hang it until it's fully dry.
- Never put it in a clothes dryer
- Keep it out of the dishwasher, even when the frame goes in
- Skip bleach, alcohol and soaps with moisturizers
Masks it's made for
This headgear is listed by Philips for two masks: the DreamWear under-the-nose Nasal and the DreamWear Silicone Pillows. The DreamWear Full Face takes its own headgear, so this one won't suit it.
- Philips doesn't list the older Gel Pillows for this version
- Frame, cushions and fabric wraps are not included
- Not the set-up kit, which adds frames and cushions

Glasses-style arms
Soft, flexible arms run back like the arms of eyeglasses, holding the frame just above your ears without touching them. The mask stays where you set it.
Less slipping
Philips designed the arms to cut down on mask slippage and steady the whole mask. That matters most if you toss and turn or wake with the cushion shifted.
Your frame
It fits the loops already on your DreamWear Nasal or Silicone Pillows frame, in any frame size. Upgrading means changing the headgear, not buying a new mask.
Easy swap
Changing over from the original headgear is a quick job that needs no tools. The fabric adjusts with the same peel-and-press tabs you already know.
Common questions
Will this work with my current DreamWear mask?
If it's a DreamWear Nasal or Silicone Pillows mask, yes. Philips says the arms connect to the loops already on the frame, so you don't need a new mask. It isn't made for the DreamWear Full Face.
Is this better than the original DreamWear headgear?
For stability, Philips says so: in its own 30-day survey, 88 percent of original-headgear users rated the arms version more stable. Both fit the same frame, so switching back later is just as easy.
Do the arms rest on my ears?
No. Philips designed them to work like the arms of a pair of glasses but to hold the mask above your ears, not on them. The frame stays steady without the arms pressing on your ears.
Does it come with a frame or cushions?
No, this is the headgear on its own. Philips also makes a set-up kit that pairs the headgear with arms with small and medium frames and cushions, and we carry it too. If you already have a DreamWear frame, this is all you need.
How long does the headgear with arms last?
There's no headgear-specific interval from Philips. The one figure it gives, in the DreamWear Silicone Pillows guide, is to dispose of the mask and headgear every year, and to swap out any part earlier if it's worn or damaged.
Does the headgear with arms contain magnets?
Philips' parts table shows magnetic clips only on the DreamWear Full Face. For people with implants that magnets can affect, Philips names the DreamWear Nasal and Silicone Pillows as alternatives, and both take this headgear.
Need help?
Between two sizes, or not sure which mask suits you? Call or chat with our team before you order.