
ResMed AirTouch F30i Cushion
ResMed controls how its prices are advertised, so we show them once you sign in. Signing in takes an emailed code, with no password to set up.
Sign in to see the priceIn stock
- Free shipping over $75
- Price match guarantee
- AirTouch F30i (Comfort and Clear frames)
- AirFit F30i frame
Overview
The AirTouch F30i cushion is the part of your full face mask resting over your mouth and just under your nose. Its fabric surface feels soft and breathable against your skin, and a new one restores the snug, comfortable seal you had when the mask was new.
It comes in Small Wide (62489), Medium (62490) and Large (62491), and each order holds one cushion. It clips onto the AirTouch F30i or AirFit F30i frame you already have, so the headgear and elbow carry over.
Key features:
- Sizes differ from AirFit: AirFit F30i cushions come in other sizes, so ResMed's sizing guide converts them: Small and Medium become Medium, and Wide becomes Large.
- One cushion for both versions: ResMed uses these same three part numbers on the fabric-wrapped Comfort and on the Clear frame, so either mask takes them.
- Frame sizes carry over: Coming from the AirFit F30i, your frame size maps straight across, as Small, Standard and Large frames keep the same names.
- Rated comfortable: In ResMed's study of the complete AirTouch F30i, 97% of experienced users rated it comfortable or very comfortable overall.
- Full Face setting: Keep your AirSense or AirCurve on Full Face, the mask choice ResMed lists for the AirTouch and AirFit F30i alike.
It suits AirTouch F30i wearers whose fabric cushion has worn, and AirFit F30i users curious how fabric feels against the skin, using the frame they already own. If you prefer a cushion over the nose, the AirTouch F20 offers memory foam instead.
Note: This cushion is made for the F30i family. Its sizes are not the same as the AirFit F30i's, so use ResMed's conversion before you order, and note the frame and lower clips are magnetic.
How it works
Taking the old one off
Open the upper strap tabs and free the straps, keeping the magnetic clips on the lower ones, then close the tabs so the fabric does not snag. Pinch the elbow buttons together to release it. Finally, take hold of each frame connector in turn and unclip it from the cushion by lifting.
Fitting the new one
Set each frame connector tab into its slot on the cushion and push until you hear a click. Make sure the QuietAir vent sits in the cushion, then refit the elbow and the upper straps. Place the cushion under your nose first, then pull the headgear on and even out the straps.
Daily and weekly care
Each day, wash the cushion gently by hand in warm water with a little mild soap, no brush needed, then rinse it, press it in a clean towel and shake the vent dry. The frame, elbow and headgear need the same wash once a week. Keep ozone and UV cleaners away from the mask.
What's included
- One AirTouch F30i ComfiSoft cushion in the size you choose
Specifications
- Sizes and part numbers
- 62489 (Small Wide), 62490 (Medium), 62491 (Large)
- Size from AirFit F30i
- S or M to Medium, SW to Small Wide, W to Large
- How to size
- ResMed sizing guide, printable template held under the nose
- Material
- ComfiSoft silicone-coated fabric with AdaptiSeal
- Mask setting
- Full Face, on ResMed AirSense and AirCurve machines
- AirMini
- Not compatible
- Magnets
- None in the cushion (the frame and lower clips are magnetic)
- Not for
- AirTouch F20, AirFit F30, AirFit F40
- Pack
- One cushion
Everything you need to know about the ResMed AirTouch F30i Cushion
Cloth-soft full face comfort
Instead of bare silicone, your skin rests on soft, breathable fabric that ResMed fused to a silicone base, a first for its masks. In ResMed's own study of experienced CPAP users, 93.9% said they really liked the fabric material.
Prevents marks on your nose
Full face masks that cross the bridge of your nose often press there all night. This cushion seals under your nose instead, a design ResMed says reduces pressure and marks, so the spot that usually takes the strain is left alone.
AdaptiSeal and septum bridge
AdaptiSeal is shaped into the soft cushion rather than a hard plastic rim, so it shifts with you when you roll over. Inside, a nasal septum bridge holds the cushion's shape, keeping the seal steady as the night goes on.

Soft fabric touch
ComfiSoft fuses soft, breathable fabric onto silicone, so what touches your face feels like cloth instead of rubber.
AdaptiSeal cushion
The seal lives in the soft cushion itself and moves with your face each time you shift position overnight.
Under the nose
The cushion covers your mouth and sits beneath your nose, leaving the bridge of your nose clear for a lighter feel.
Fits AirFit F30i
It clips onto the AirFit F30i frame as well, so silicone users can switch to fabric without buying a new mask.
Frequently Asked Questions
I wore AirFit F30i. Which size now?
ResMed's sizing guide converts it: Small Wide stays Small Wide, Small and Medium both move to Medium, and Wide moves to Large. The letters do not line up one for one, so check this before you reorder out of habit.
Which frames does this cushion fit?
Every AirTouch F30i frame, and the AirFit F30i frame, since ResMed calls the two cushions interchangeable. It is a different part from the AirTouch F20, AirFit F30 and AirFit F40 cushions, so those masks will not take it.
How do I wash a fabric cushion?
Each day, let it sit in warm, mildly soapy water and work it gently with your fingers, since ResMed says the fabric needs no brush. Rinse it under the tap, press it in a clean towel and leave it to dry in the shade.
Is pilling on the fabric a problem?
Not by itself, since ResMed says pilling, fraying and wrinkles in the fabric do not affect how the mask performs. ResMed's guide calls for a fresh cushion every month, and sooner if you see a crack or tear.
Does this cushion work with an AirMini?
No. ResMed's compatibility list puts an X against the AirMini for the whole F30i family, AirTouch and AirFit alike. For AirSense and AirCurve, choose Full Face in the mask menu.