ResMed AirTouch F20 Full Face Mask
ResMed controls how its prices are advertised, so we show them once you sign in. Signing in takes an emailed code, with no password to set up.
Sign in to see the priceIn stock
- Free shipping over $75
- 30-night fit guarantee Try your mask for up to 30 nights. If it doesn't fit, send it back for store credit toward another size or style. Unopened masks can be returned for a refund or store credit.
- Price match guarantee
Overview
ResMed's AirTouch F20 is a full face mask with a cushion of UltraSoft memory foam where most masks use silicone. The foam feels softer against your skin and settles into the contours of your face, helping it hold a comfortable seal without tight straps.
The frame sits just below your eyes and leaves your view open, and a pair of magnetic clips put the mask on or take it off in a few seconds. The foam itself lets a tiny amount of air pass through, without lowering your therapy pressure.
Key features:
- Quick hose release: Press the two elbow buttons to unhook from your machine for a trip to the bathroom, with the mask still on.
- For Her sizes: Faces that suit a smaller fit can choose the For Her style, offered in Small and Medium.
- Works with AirMini: Use it on ResMed's AirMini travel machine by adding the AirMini setup pack made for F20 masks.
- Made without latex: ResMed builds the mask without natural rubber latex, which is worth knowing if you're allergic to latex.
- Licensed in Canada: The AirTouch F20 holds an active Health Canada medical device licence, shown in full in the Specifications table.
The AirTouch F20 suits people with sensitive skin, anyone who wakes with red marks across the nose bridge, and mouth breathers. ResMed also suggests it for facial hair, though how well any cushion seals over a full beard varies from person to person.
Note: Magnets sit in the frame and in each lower clip. Anyone with a pacemaker, defibrillator, or another magnet-sensitive implant should ask us about a mask without them, as should whoever shares your bed or is often close to you.
How it works
Putting the mask on
Start with both magnetic clips undone. Seat the cushion so its upper edge rests on your nose bridge, draw the headgear back over your head, logo facing outward, and run the lower straps under your ears before clipping them to the frame.
Tighten the upper straps and then the lower straps a little at a time, keeping both sides even, until the mask feels steady. Turn the machine on before you judge the seal, and give the foam a little time to settle.
Frame, elbow and headgear care
Every day, take off the cushion and give the frame and elbow a rinse under the tap, then leave them in a bowl of warm water with a gentle detergent for ten minutes at most. Shake and brush them, paying attention to the vent holes, rinse once more, and let them dry away from sunlight.
The headgear gets the same hand wash once a week, and its magnetic clips can stay on while you do it. Squeeze out the extra water and let it air-dry before you put it back on the frame.
What's included
- AirTouch F20 frame and UltraSoft memory foam cushion in your size
- Headgear, with its two magnetic clips
- QuietAir quick-release elbow
Specifications
- Mask type
- Full face, covers nose and mouth
- Cushion
- UltraSoft memory foam, replaced monthly
- Sizes
- Small, Medium, Large, plus For Her Small and Medium
- Pressure range
- 3 to 40 cm H2O
- Elbow
- QuietAir, quick-release
- Sound level
- 21 dBA
- Size (H x W x D)
- 154 x 159 x 147 mm, without headgear
- Magnets
- Frame and lower headgear clips
- Machine setting
- Full Face
- Materials
- Not made with natural rubber latex
- Health Canada licence
- 98147 (Class II)
Features and fit
Settling in over time
Memory foam settles into the shape of your face gradually, rather than sealing the instant you put it on. Tighten the straps only until the seal feels comfortable.
- Top-edge leaks need the upper straps, chin leaks the lower straps
- If a leak won't settle, switch the machine off, reseat the cushion, and restart
- The foam lets a tiny amount of air through without affecting your pressure
Frame and headgear
The padded, flexible frame bends to fit a range of facial profiles, and the plush straps keep it stable from behind your head.
- The elbow swivels all the way around to follow you as you move
- The lower straps can sit over or under your hair, whichever you prefer
Cleaning and replacement
Replace the cushion every month, as ResMed's user guide recommends. Between replacements, it needs nothing more than an occasional wipe.
- Use CPAP wipes or other alcohol-free wipes, on the outside only
- Never rinse or soak the foam, and replace a cushion that gets wet
- Keep it away from household cleaners and direct sunlight
- Ozone cleaners can weaken the seal, and ResMed's warranty excludes that damage
Compatible machines and cushions
Use the AirTouch F20 with any CPAP or bilevel machine your care provider recommends, ResMed or not. Set an AirSense or AirCurve to the Full Face mask type.
- ResMed AirMini, through the AirMini setup pack for F20 masks
- AirFit F20 silicone cushions also clip onto this frame
- On other brands, use the MIR FULL or FULL FACE setting
Memory foam cushion
What touches your face is soft, light, and gentle on skin, because the cushion is UltraSoft memory foam. ResMed designed it to help reduce the red marks a mask can leave by morning.
Open view
Your line of sight stays free for a book or the TV before bed, because the frame rests below your eyes. With less of the mask in view, it can feel less confining.
Cushion care
Your mornings are shorter: the foam cushion skips the daily wash, so only the frame and elbow go in the sink. ResMed's testing found the cushion stays hygienic for its full month of use.
Magnetic clips
Putting the mask on and taking it off takes seconds. Magnets guide the two lower clips onto the frame and a twist frees them, which ResMed notes helps if small fastenings are hard for you to handle or see.
Common questions
How often do the frame and headgear need replacing?
ResMed's replacement guide puts the frame system on a three-month cycle and the headgear on a six-month one. Swap either one sooner if it cracks, tears, or starts to look worn, per ResMed's user guide.
Which AirTouch F20 size should I order?
Print ResMed's F20 fitting template at actual size and hold it against your face. Its top edge goes at the highest point of your nose bridge, and its bottom just under your lower lip. The size it lands on is your cushion size, which may differ from the size you wear in another mask.
How is the AirTouch F20 For Her different?
The For Her version has smaller headgear, lavender trim in place of blue, and comes in Small and Medium. Everything else matches the standard mask, including the cushions, which share part numbers with the standard Small and Medium.
Is the AirTouch F20 safe with a pacemaker or implant?
No. ResMed says not to use it if you, or a partner or anyone else close to you while you wear it, has a pacemaker, neurostimulator, defibrillator, infusion pump, shunt, or metal implant such as an aneurysm clip. Keep its magnets 150 mm or more from such devices. We can suggest a mask without them.
Should I choose the AirTouch F20 or the AirFit F20?
Go with the AirTouch F20 if skin comfort comes first. Want silicone that goes in the sink every day? That's the AirFit F20. Both use the same frame, headgear, and elbow, so you can switch cushions when your next one is due.
Is a prescription required for the AirTouch F20?
No. Masks don't need a prescription, so you can order this one straight away. We only ask for a prescription with CPAP machines and ventilators, before they ship.
Need help?
Between two sizes, or not sure which mask suits you? Call or chat with our team before you order.