RESMED | SKU 37479

ResMed HumidAir Cleanable Water Tub for AirSense 10

Price after sign-in

ResMed controls how its prices are advertised, so we show them once you sign in. Signing in takes an emailed code, with no password to set up.

Sign in to see the price

In stock

  • Free shipping over $75
  • Price match guarantee
Fits
  • AirSense 10 AutoSet
  • AirSense 10 AutoSet for Her
  • AirSense 10 Elite
  • AirSense 10 CPAP
  • AirCurve 10 VAuto
  • AirCurve 10 S
  • AirCurve 10 ST
Replace every Every 2.5 years (ResMed)
Overview

This is the HumidAir tub you can take apart, made for the humidifier on the ResMed AirSense 10. Its lid lifts off and its seal comes out, and ResMed designs it to last two and a half years instead of six months.

Inside the box is one cleanable tub, ResMed part 37479. ResMed lists it for every AirSense 10 model, the AutoSet for Her included, and for the AirCurve 10 VAuto, S and ST bilevels.

Key features:

  • Lid lifts off: The lid detaches from the base completely, so nothing stops you seeing into every corner of the tub.
  • Seal that comes out: The silicone seal pulls free of the lid and presses back along its edges, and ResMed calls slight discolouration normal.
  • Docks into the side: Like every HumidAir tub, it seats into the machine's side and releases when you press gently on its top and bottom.
  • Matches the standard tub: Capacity and fit are identical to the standard tub, so changing over makes no difference to your settings.
  • Ready for ClimateLineAir: Pair it with a ClimateLineAir heated tube and Climate Control, ResMed's automatic humidity mode, becomes available on your machine.
  • Hand-wash only: ResMed's North American user guide gives every HumidAir water tub this rating, the cleanable one included.

Choose it if you like taking your tub apart and looking over every piece before it goes back into your machine each week. If a simple swap on a fixed schedule suits you better, the standard tub fits the same AirSense 10 machines.

Note: Only the AirSense 10 and AirCurve 10 families take this tub. AirSense 11 and AirCurve 11 machines need the HumidAir 11 cleanable tub, which is a separate ResMed part.

How it works

Taking it apart

Let the tub cool for ten minutes, then lift it out of the side of the machine. Holding the base, open the lid all the way and pull it until it releases. Then pull the silicone seal out of the lid.

Washing the parts

Each week, wash the lid, base, and seal separately using warm water and a mild detergent, and rinse them well. Let every piece dry out of the sun and away from heat. ResMed rules out bleach, alcohol, aromatic solutions, and scented oils, and a one-to-ten vinegar solution clears white deposits.

Putting it back together

Press the seal into the lid along every edge until it sits firm. Fit one side of the lid into the pivot hole on the base and slide the other side down the ridge until it clicks. Fill with distilled water to the maximum mark.

What's included
  • ResMed HumidAir cleanable water tub
Specifications
ResMed part
37479
Capacity
380 mL, filled to the max line
Parts
Lid, base and removable silicone seal
Materials
Injection-moulded plastic, stainless steel, silicone seal
Care rating
Hand wash (ResMed North American guide)
Disinfection
Validated for 130 thermal or chemical cycles
Design life
2.5 years (ResMed)
Does not fit
AirSense 11, AirCurve 11
ResMed HumidAir Cleanable Water Tub for AirSense 10Price after sign-in

Everything you need to know about the ResMed HumidAir Cleanable Water Tub for AirSense 10

One tub for the long haul

In ResMed's design life table, the cleanable tub is rated for two and a half years, against six months for the standard tub. That means far fewer reorders, as long as the tub stays free of cracks and clouding.

Every corner within reach

With the lid in place, the inside corners of a water tub are awkward to see. On this one the lid detaches completely and the seal lifts out, so you can inspect each part on its own before putting it back together.

Rated for disinfection

ResMed validates this tub for 130 hot-water and chemical disinfection cycles, the routine clinics use between patients. At home, ResMed says ordinary washing is all it needs, but the rating shows how much the tub is built to withstand.

Front view of the ResMed HumidAir cleanable water tub for AirSense 10, showing where the lid meets the base

Comes apart

The lid comes off the base and the seal lifts free, so every surface of the tub is easy to see and reach.

Disinfection rated

It's the AirSense 10 tub ResMed rates for disinfection, built to stand up to the hot-water and chemical cycles clinics use.

Removable seal

The silicone seal comes away from the lid for washing on its own, then presses back into place along every edge.

Same fit

It holds as much as the standard tub and fits the same machines, so switching over changes nothing about your night.

Frequently Asked Questions

Does the cleanable tub fit AirSense 11?

No, it's an AirSense 10 part. ResMed makes a separate HumidAir 11 cleanable tub for the AirSense 11 and AirCurve 11, and the two don't swap. Every AirSense 10 model takes this one, as do the AirCurve 10 VAuto, S and ST.

What's the difference from the standard tub?

Both hold the same amount of water and fit the same machines. This one takes apart, is rated for disinfection, and has a two-and-a-half-year design life. ResMed rates the standard tub for six months and says it can't be disinfected.

Can the cleanable tub go in the dishwasher?

Not according to ResMed's North American user guide, which says to hand wash every water tub using warm water and a mild detergent. Some overseas editions allow a top-shelf cycle, but we follow the guide that covers Canada.

How long does the cleanable tub last?

ResMed's user guide puts its design life at two and a half years. Swap it out early if you notice leaks, cracks, clouding, pitting or crazing, or a torn seal. Slight discolouration of the silicone is normal, ResMed says.

Why does it leak after I wash it?

Check the seal first. ResMed's high leak message points to the tub seal, so press it down firmly along all its edges, then make sure the lid has clicked onto the base and the tub is fully inserted.