ResMed AirFit F30 Headgear

For sleepers keeping their AirFit F30, this is ResMed's own headgear for the mask, so the fit you rely on stays exactly as it was. Fresh straps let the small under-nose cushion seal with a light pull instead of a hard one.

It's ResMed part 64161, in one size for the F30's single frame and both cushion sizes. Magnetic clips come on the lower straps. It's sold as headgear alone, without a frame, cushion, or elbow.

Key features:

• Same part as day one: This is the headgear ResMed packed with every complete F30 system, so nothing about the fit changes when you swap.
• Clips stay put: The clips remain on the lower straps whenever the headgear comes off, so nothing small goes missing between uses.
• Tube in front: The F30's hose meets an elbow at the front of the frame, leaving the headgear to hold the cushion square under your nose.
• Made without latex: ResMed lists the F30 headgear as not made from latex, and the mask as free of PVC and phthalates such as DEHP.
• Magnet warning: The clips and frame hold magnets, so ResMed asks anyone with certain implants, or a bed partner with one, to read its warning first.

It suits F30 wearers who want to keep the mask they know rather than start fresh with a new design and a new fitting. If the cushion now needs harder pulling to seal, the straps are usually what has worn out first.

Note: This headgear is only for the AirFit F30. The F30i looks close but takes a different part, 63372, so check where your hose connects before ordering.